详细介绍
Yellow Phosphorus tank Container
TANK CONTAINER FOR PHOSPHOR |
|||||
Ext. Length |
6,058mm |
Ext. Width |
2,438mm |
||
Ext. Height |
2,591mm |
M.G.W. |
30,480Kgs |
||
Tare |
4,500Kgs |
Max. Payload |
25,980Kgs |
||
Cubic Capacity |
17.5m³ |
Tank Design Standard |
ASME-VIII-1&GB150-98 |
||
Max. Design Pressure |
2.65bar |
Design Operating Temp. |
-20 ~ +120°C |
||
Testing Pressure |
4.0bar |
Material of Tank Body |
1Cr18Ni9Ti/ 316L/ 316 or carbon steel with lining |
||
Tank Body Dia. |
2,000mm |
Tank Body Thickness |
6.0mm |
||
Manhole Dia. |
450mm |
Stacking |
192,000kgs |
||
Facilities |
|||||
Roof Discharging Valve |
DN80 ball valve |
Pressure Relief Valve |
2.5" relief valve, pressure /vacuum |
||
Charging Valve |
DN50 ball valve |
N 2 Inlet Valve |
1.5" ball valve |
||
N 2 Outlet Valve |
1.5" ball valve |
Charging Inlet Dia. |
250mmon top of manhole |
||
Thermograph |
Thermocouple Thermograph 0~120 °C |
||||
Heating System |
|||||
Design Pressure |
4.0bar |
Testing Pressure |
6.0bar |
||
Seam Inlet/Outlet |
3/ 4" with cover |
Heating Area |
7.5m2 |
||
Thermal Insulation Layer |
50mmthick rock-wool covered with 0.8mm thick zinc-plated plate or stainless steel plate |